GPS-навигаторы
Все, что Вы хотели знать о навигаторах?
Chigarev,
попробуй опознать в
http://yfgps.manufacturer.globalsources.co...0149681/ALL.htm
http://www.yfgps.com/en/--------------------
Эскизы прикрепленных изображений
Несколько вопросов к знатокам:
1.Подсоединив навигатор через J-TAG можно ли добраться до С диска. Что бы удалить из автозагрузки не нужный файл. В автозагрузку загнали файл Que.exe и он на этом висит, написав на дисплее надпись «Plise wait». ???
2.У кого есть навигатор с процессором POLLUX. Нужна прошивка. 3.5д без наворотов. Win без разницы. Так как есть 2 нави на заставках. Один win 4.2 другой win 5.
Chigarev,
Цитата(Chigarev @ 23.3.2009, 16:19) Дорогие формунчане помогите идентифицировать китайца. Еще интерисует русская прошивка, в како формате карты и какая аперационка? Буду примного благодаренПочитай вот здесь Dealextreme в конце топика, мне аналогичный пришел из Китая, тоже без русского, после двух нормальных, и это, естественно, не Самсунг--------------------
Video Tab
(Note: You will NOT see this tab on devices with Windows Mobile 5 and higher)
This tab allows Pocket Controller-Pro to use "Video Acceleration" to provide improved remote control performance. For mobile devices that have displays with resolutions larger than 240 X 320 resolutions, we recommend that you try using Video Acceleration. Please note that Video Acceleration may not work on some mobile devices. To test if Video Acceleration is supported on your mobile device, change the Mode setting to Test, and then click on the OK button, the device will need to be rebooted for this setting to be activated. If the device reboots successfully change the setting to "Enabled" and click on the OK button. If the device does not reboot properly, reboot the device once again and the setting will be automatically set back to "Disabled". You can contact us if you have problems using this setting.
Mobile Device Agent Configuration: Video Tab
Option Description
Mode To test if your mobile device supports Video Acceleration, set Mode to "Test", the device will then prompt you to reboot. If the device fails to boot up normally, soft reset the device again manually to recover. If the device continues functioning normally after the soft reset in "Test" mode, change the Mode setting to "Enabled". You can disable Video Acceleration anytime by setting Mode to "Disabled", the application will prompt you to soft reset the device to complete the operation.
Driver Path Video Acceleration uses a driver to provide accelerated remote control performance. The default location for this driver is in the \Windows directory on the mobile device. If you do not want to lose the driver file after a battery failure or hard reset you may want to re-locate the driver file in stable storage. To change the location of the driver file, click on the Change button, a warning message will be displayed, select OK on the warning dialog. The Driver Path field will then become editable. Change the path to the stable storage location you desire, and click on the 'Set' button. It is important that the stable storage location you choose is not on a removable stable storage card; if the card is removed the driver will not be found and the device will not boot properly.
попробуй опознать в
http://yfgps.manufacturer.globalsources.co...0149681/ALL.htm
http://www.yfgps.com/en/--------------------
Эскизы прикрепленных изображений
Несколько вопросов к знатокам:
1.Подсоединив навигатор через J-TAG можно ли добраться до С диска. Что бы удалить из автозагрузки не нужный файл. В автозагрузку загнали файл Que.exe и он на этом висит, написав на дисплее надпись «Plise wait». ???
2.У кого есть навигатор с процессором POLLUX. Нужна прошивка. 3.5д без наворотов. Win без разницы. Так как есть 2 нави на заставках. Один win 4.2 другой win 5.
Chigarev,
Цитата(Chigarev @ 23.3.2009, 16:19) Дорогие формунчане помогите идентифицировать китайца. Еще интерисует русская прошивка, в како формате карты и какая аперационка? Буду примного благодаренПочитай вот здесь Dealextreme в конце топика, мне аналогичный пришел из Китая, тоже без русского, после двух нормальных, и это, естественно, не Самсунг--------------------
Video Tab
(Note: You will NOT see this tab on devices with Windows Mobile 5 and higher)
This tab allows Pocket Controller-Pro to use "Video Acceleration" to provide improved remote control performance. For mobile devices that have displays with resolutions larger than 240 X 320 resolutions, we recommend that you try using Video Acceleration. Please note that Video Acceleration may not work on some mobile devices. To test if Video Acceleration is supported on your mobile device, change the Mode setting to Test, and then click on the OK button, the device will need to be rebooted for this setting to be activated. If the device reboots successfully change the setting to "Enabled" and click on the OK button. If the device does not reboot properly, reboot the device once again and the setting will be automatically set back to "Disabled". You can contact us if you have problems using this setting.
Mobile Device Agent Configuration: Video Tab
Option Description
Mode To test if your mobile device supports Video Acceleration, set Mode to "Test", the device will then prompt you to reboot. If the device fails to boot up normally, soft reset the device again manually to recover. If the device continues functioning normally after the soft reset in "Test" mode, change the Mode setting to "Enabled". You can disable Video Acceleration anytime by setting Mode to "Disabled", the application will prompt you to soft reset the device to complete the operation.
Driver Path Video Acceleration uses a driver to provide accelerated remote control performance. The default location for this driver is in the \Windows directory on the mobile device. If you do not want to lose the driver file after a battery failure or hard reset you may want to re-locate the driver file in stable storage. To change the location of the driver file, click on the Change button, a warning message will be displayed, select OK on the warning dialog. The Driver Path field will then become editable. Change the path to the stable storage location you desire, and click on the 'Set' button. It is important that the stable storage location you choose is not on a removable stable storage card; if the card is removed the driver will not be found and the device will not boot properly.